Standard Cylinder DDA Series

double action

●Cylinder diameter Φ32 to 125 This is synonymous with tie rod medium cylinder, with rich tandem configuration and ISO standard installation style.

|

|

Non-Rotating Double Action

●Cylinder diameter Φ40-100 conforms to ISO standard. The hexagonal piston rod does not rotate.

Double rod double acting

●Cylinder diameters from Φ32 to 125 comply with ISO standards. A cylinder with rods on both sides of the piston.

|

|

Non-rotating double rod double acting

●Cylinder diameter Φ40-100 conforms to ISO standard. A cylinder with a hexagonal piston rod that does not rotate and has piston rods on both sides of the piston.

Multi-position double acting

●Cylinder diameter Φ40-100 conforms to ISO standard. Two stop positions can be set by connecting two cylinders in series.

|

|

Double stroke double acting

●Cylinder diameter Φ40-100 conforms to ISO standard. The two cylinders can be assembled back-to-back with two operating strokes.

Push side stroke adjustment double acting

●Cylinder diameter Φ40-100 conforms to ISO standard. Cylinders with stoppers that limit travel.

|

|

Pull side stroke adjustment double acting

●Cylinder diameter Φ40-100 conforms to ISO standard. Cylinders with stoppers that limit travel.

Low hydraulic double acting

●Cylinder diameter Φ32-100 conforms to ISO standard. Low pressure operation control of the cylinder can be operated at low oil pressure by using a pneumatic oil converter。

|

|

VALPACK double acting

●Cylinder diameter Φ40-100 conforms to ISO standard. Solenoid valve and air cylinder are integrated to reduce wasted air consumption in piping and save piping.

end hold double action

●Cylinder diameter Φ40-100 conforms to ISO standard. At the end of the stroke, a mechanical locking mechanism is provided in the cylinder so that it does not drop due to weight when exhausting.

|

|

double-acting brake

●Cylinder diameter Φ40-100 conforms to ISO standard. Cylinder with brake mechanism for fixing intermediate stops and positions.