Jig Cylinder With Guides SGDA Series
- Ideal for braking and hoisting on conveyance lines
- The corresponding uses are mainly sliding bearings and rolling bearings.
- There are four ways, two-way piping installation form
| Bore mm | journey mm | Piping connection diameter |
| 6～63 | 5～200 | M5.Rc1/8 Rc1/4 |
Low Profile Cylinder SGDA with Guide
| Double acting type with guide φ6/8/10 ●Cylinder diameter Φ6 to 10 Small diameter types (Φ6, 8, 10 mm) can be used as standard guide clamp cylinders. | | | | | Guide stroke adjustment double acting type φ6.8/ 10 ●The cylinder diameter is Φ6~10 small diameter type, which is the standard clamp cylinder stroke adjustment type with guide rail. |
| Double acting belt guide ●The cylinder diameter is from Φ12 to 63. Four kinds of installations are possible according to the installation environment, and the piping position can be selected from two directions. | | | | | Double acting, adjustable stroke, with guide ●Cylinder diameter Φ12 to 63 is equipped with an adjustment mechanism that can limit the outlet stroke. Guided gripper cylinders are easier to use. |
| Guided end retention double acting ●Cylinder diameter Φ12~63 There is a mechanical locking mechanism inside the cylinder at the end of the stroke to prevent it from falling under its own weight. | | | | | (Universal Special) Variable Seat Cushion Specifications with Guide ●The push-pull side is equipped with a variable cushion. Lightly absorb shock at the end of the stroke. This is a general purpose special product. |
| (Universal) High Power Type with Guide ●The thrust on the push side is increased (about 1.5 times the standard thrust). This is a general purpose special product. | | | |
|