Electric Actuators_ELEWAVE Series

Electric Actuators_ELEWAVE Series

Electric Actuators_ELEWAVE Series

Small, low profile square drive
A long table ideal for press control is also available High-speed type (120mm/s)

Product desciption

NS skateboard EWM5HSA series

Small, low profile square drive
A long table ideal for press control is also available
High-speed type (120mm/s)

Type of motor	Maximum transportable mass kg	type Slide table size
2-phase step motor	1 (horizontal) 0.4 (vertical)	high speed long

NS skateboard EWM5HLA series

Small, low profile square drive
A long table ideal for press control is also available
High-speed type (120mm/s)

Type of motor	Maximum transportable mass kg	type Slide table size
2-phase step motor	1 (horizontal) 0.4 (vertical)	high speed long

NS skateboard EWM5SSA series

Small, low profile square drive
A long table ideal for press control is also available
High-speed type （50N)

Type of motor	Maximum transportable mass kg	type Slide table size
2-phase step motor	2(horizontal) 0.8(vertical)	high thrust short

NS skateboard EWM5SLA series

Small, low profile square drive
A long table ideal for press control is also available
High-speed type （50N)

Type of motor	Maximum transportable mass kg	type Slide table size
2-phase step motor	2(horizontal) 0.8(vertical)	high thrust long

Electric Finger EWHA12A Series

A type of holding force requirement has been added to further realize simple operation
Speed control can be performed at will to achieve soft touch
High precision and high rigidity through linear guides
The stroke can be set arbitrarily by adjusting the value (64-bit)

Type of motor	Maximum holding force N	Opening and closing stroke
2-phase step motor	12～17	14mm

Electric Finger EWHA24A Series

A type of holding force requirement has been added to further realize simple operation
Speed control can be performed at will to achieve soft touch
High precision and high rigidity through linear guides
The stroke can be set arbitrarily by adjusting the value (64-bit)

Type of motor	Maximum holding force N	Opening and closing stroke
2-phase step motor	22～35	20mm

Electric Finger EWHA36A Series

A type of holding force requirement has been added to further realize simple operation
Speed control can be performed at will to achieve soft touch
High precision and high rigidity through linear guides
The stroke can be set arbitrarily by adjusting the value (64-bit)

Type of motor	Maximum holding force N	Opening and closing stroke
2-phase step motor	33～47	20mm

Electric rotary actuator EWHRT1A series

Seven types of table-top rotary actuators are designed to be more compact and easier to use.
Adopts hollow shaft for wiring and piping
The pan angle can be set arbitrarily (64-bit)
Collision-free start and stop can be set arbitrarily for acceleration and deceleration.

Type of motor	Maximum torque Nm	Round-trip accuracy
2-phase step motor	0.1	+/-0.02 degrees

Electric rotary actuator EWHRT3A series

Seven types of table-top rotary actuators are designed to be more compact and easier to use.
Adopts hollow shaft for wiring and piping
The pan angle can be set arbitrarily (64-bit)
Collision-free start and stop can be set arbitrarily for acceleration and deceleration.

Type of motor	Maximum torque Nm	Round-trip accuracy
2-phase step motor	0.25	+/-0.02 degrees

Electric rotary actuator EWHRT5A series

Seven types of table-top rotary actuators are designed to be more compact and easier to use.
Adopts hollow shaft for wiring and piping
The pan angle can be set arbitrarily (64-bit)
Collision-free start and stop can be set arbitrarily for acceleration and deceleration.

Type of motor	Maximum torque Nm	Round-trip accuracy
2-phase step motor	0.5	+/-0.02 degrees

Electric rotary actuator EWHRT10A series

Seven types of table-top rotary actuators are designed to be more compact and easier to use.
Adopts hollow shaft for wiring and piping
The pan angle can be set arbitrarily (64-bit)
Collision-free start and stop can be set arbitrarily for acceleration and deceleration.

馬達種類	Maximum torque Nm	Round-trip accuracy
2-phase step motor	1.0	+/-0.02 degrees

Electric rotary actuator EWHRT20A series

Seven types of table-top rotary actuators are designed to be more compact and easier to use.
Adopts hollow shaft for wiring and piping
The pan angle can be set arbitrarily (64-bit)
Collision-free start and stop can be set arbitrarily for acceleration and deceleration.

Type of motor	Maximum torque Nm	Round-trip accuracy
2-phase step motor	2.0	+/-0.02 degrees

Electric rotary actuator EWHRT40A series

Seven types of table-top rotary actuators are designed to be more compact and easier to use.
Adopts hollow shaft for wiring and piping
The pan angle can be set arbitrarily (64-bit)
Collision-free start and stop can be set arbitrarily for acceleration and deceleration.

Type of motor	Maximum torque Nm	Round-trip accuracy
2-phase step motor	4.0

Electric rotary actuator EWHRT60A series

Seven types of table-top rotary actuators are designed to be more compact and easier to use.
Adopts hollow shaft for wiring and piping
The pan angle can be set arbitrarily (64-bit)
Collision-free start and stop can be set arbitrarily for acceleration and deceleration.

Type of motor	Maximum torque Nm	Round-trip accuracy
2-phase step motor	6.0	Round-trip accuracy

NS skateboard, electric finger controller EWHC-NH series

NS slider, electric finger controller
Closed-loop control
Origin detection method: detection stroke end
Position setting 64 points
Position point input: input numerical value, teaching input, direct teaching input

series	point setting	way of action
For EWHA For EWM5	64 points	PTP control force control

NS skateboard, electric finger pulse train input controller EWHCP-NH series

What is the pulse train input? The "Detailed Instructions for Pulse Train Input" can be downloaded free of charge in the "CAD/Instructions" section
NS slider, pulse train input controller for electric finger, closed loop control
Origin detection method: detection stroke end
Pulse train input method: differential conversion type/open electrode type
Pulse train input command form: CW/CCW, pulse/symbol (can conform to positive and negative logic)

series	control input	way of action
For EWHA For EWM5	6 points	position control force control

Controller EWHC-RS for Electric Rotary Actuator EWHRT1A

For EWHRT1A
Closed-loop control
Origin detection method: encoder Z phase
Position point setting 64 points
Position point input: input numerical value, teaching input, direct teaching input

series	Acceleration setting	way of action
For EWHRT1A	1～100％	PTP

Pulse train input controller EWHCP-RS series for electric rotary actuator EWHRT1A

What is the pulse train input? The "Detailed Instructions for Pulse Train Input" can be downloaded free of charge in the "CAD/Instructions" section
NS slider, pulse train input controller for electric finger, closed loop control
Origin detection method: detection stroke end
Pulse train input method: differential conversion type/open electrode type
Pulse train input command form: CW/CCW, pulse/symbol (can conform to positive and negative logic)

series	control input	way of action
EWHRT1A	6 points	position control

Electric actuator EWHRT controller EWHC-RA series

Electric actuator EWHRT controller EWHC-RA series
Closed-loop control
Origin detection method: encoder Z phase
Position point setting 64 points
Position point input: input numerical value, teaching input, direct teaching input

series	Acceleration setting	way of action
EWHRT用	1～100％	PTP

Pulse train input controller EWHCP-RA series for electric actuator EWHRT

What is the pulse train input? The "Detailed Instructions for Pulse Train Input" can be downloaded free of charge in the "CAD/Instructions" section
NS slider, pulse train input controller for electric finger, closed loop control
Origin detection method: detection stroke end
Pulse train input method: differential conversion type/open electrode type
Pulse train input command form: CW/CCW, pulse/symbol (can conform to positive and negative logic)

series	control input	way of action
EWHRT用	6 points	position action

Teaching control box EWHTB series (for electric series)

For electric finger, electric rotary drive
Parameter/position point setting and initialization, position point movement and teaching movement

keyboard	I/O	voltage
8 keyboard	RS-232C	DC12V

Transfer data cable for electric series EWHKA series

series	cable length	Cable type
EWHA EWHRT EWM5用	3m.5m	motor and Encoder