iB-Flow

The iB-Flow main body of the digital flow controller simply sets the operating time of the cylinder, and the safe structure that the needle valve will not loosen, is ideal for simultaneous operation of double-acting cylinders and precise flow adjustment during air injection.

iB-FLOW body

Digital setting cycle time: simply set the operating time of the cylinder (input a value of 0.05 to 30 seconds
Auxiliary Locking Mechanism: Safe structure that the needle valve will not loosen.
Visual action time: The action time of the cylinder can be measured.
Copy function: Simple setting of cylinder synchronization.
Please click the "CAD/Instructions" button on the right to download the instruction manual
control flow
l/min 0.5MPa use pressure
Mpa Use the outer diameter of the trachea
mm
75～530 0.1～0.7 4～12

Connect the setting device to iB-Flow to perform various settings.
Automatically adjust the action time of the double-acting cylinder.
The opening degree (throttling amount) when the flow rate is adjusted.
The operating time of the cylinder can be measured.
By combining the setting unit and the power supply
unit, it can be used even in environments where there is no power supply around.
Please click the "CAD/Instructions" button on the right to download the instruction manual
series Input Voltage Operating temperature
iB-Flow用 AC100～240V（AC變壓器） 0～40度

AC adaptor that can be used on setters and battery packs.
I/O cable between the main unit and the setting unit.
Special bracket and others
type Corresponding series –
I/Opower supply
ACTransformers and others IBFLseries

control flow l/min 0.5MPa	use pressure Mpa	Use the outer diameter of the trachea mm
75～530	0.1～0.7	4～12